manualshive.com logo in svg

Panasonic KX-TDE100, Installation Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

3.2.7  Installing/Removing the Optional Service Cards

CAUTION

To protect the back board from static electricity, do not touch parts on the back board in the main unit and
on the optional service cards. To discharge static electricity, touch ground or wear an earthing strap.

Note

The optional service cards can be installed or removed while the DC power is supplied. However, when
installing or removing the IPCMPR card, the DC power supply must be turned off.

Installing Optional Service Cards

1.

Insert the card along the guide rails.

Guide Rail

2.

Holding the card as shown below, push the release lever in the direction of the arrow so that the card
engages securely with the connector on the back board.

Release Lever

Back Board

Installation Manual

63

3.2.7 Installing/Removing the Optional Service Cards

Summary of Contents for KX-TDE100







































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDE100

Brands by name

Popular brands

Load more brands