Panasonic KX-TD1232NL Installation Manual Download Page 83

Page: 83 / 183

2.4

Installation of Optional Cards and Unit

General Installation

Hook the cabinets onto the main unit and slide the cabinets to the left until they are secured.

Loosen the outside screw of the expansion unit and slide the cover to the right.

Secure the inside screw (included with the DISA or Remote Unit) to fix the cabinet to the
main unit.

Tie all of the cords into a bundle. If other cords are exposed from the upper cabinets, tie
them also.

Close the cabinet cover and secure the outside screw.

Cover the cords with the cord holder. If two cabinets are connected together and attached to
the main unit, use the cord holder included with the DISA or Remote Unit.

Panasonic

D816

DIGITAL SUPER HYBRID SYSTEM

Panasonic

D816

DIGITAL SUPER HYBRID SYSTEM

Outside screw

Panasonic

D816

DIGITAL SUPER HYBRID SYSTEM

Inside screw

Summary of Contents for KX-TD1232NL
























































































































































































Search results

Summary of Contents for KX-TD1232NL

Reviews:

Related manuals for KX-TD1232NL

Brands by name

Popular brands

Panasonic KX-TD1232NL, Installation Manual

Search results

Summary of Contents for KX-TD1232NL

Reviews:

Related manuals for KX-TD1232NL

Brands by name

Popular brands