Panasonic KX-TD1232NL Installation Manual Download Page 107

Page: 107 / 183

2.5

Auxiliary Connection for Power Failure Transfer

General Installation

107

Note

•

In the event of a power failure, system memory is protected by a factory-provided lithium
battery. There is no memory loss except the memories of Camp-on, Saved Number Redial,
Last Number Redial, Call Park and Message Waiting.

•

The system changes the current connection to this connection automatically when the
power supply stops.

•

If DC power is available from backup batteries if AC power fails, the system does not
change the current connection to the above connection.

•

The KX-TD1232 is illustrated as the main unit, and the KX-TD170 and KX-TD180 are
illustrated as the expansion units.

Features Guide References

Power Failure Transfer

Summary of Contents for KX-TD1232NL
























































































































































































Search results

Summary of Contents for KX-TD1232NL

Reviews:

Related manuals for KX-TD1232NL

Brands by name

Popular brands

Panasonic KX-TD1232NL, Installation Manual

Search results

Summary of Contents for KX-TD1232NL

Reviews:

Related manuals for KX-TD1232NL

Brands by name

Popular brands