manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 300 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 300

Settings and Printing

Network

Network

Maintenance and Spec.

Using the Web Server

Settings and Printing

Network

Network

Maintenance and Spec.

115

If an IP address have been assigned to a printer, you can access the printer’s Web Server. It
allows monitoring or setting the printer.

1

Open the browser (Internet Explorer or Netscape).

2

Enter a printer address in the Address box and press Return key.

The Web Server screen is displayed.

Ex.
http://172.16.xxx.xxx/

1

Display the Web Server screen (see above).

2

Click Network Setup in the left pane.

The Enter Network Password window is displayed.

3

Type root in the User name box and click 

.

•If the password is already set, the password must be entered in the Password box.

4

Click the menu item (TCP/IP, NetWare...) and change the setting.

Using the Web Server

Displaying the Web Server Screen

Setting the Printer

OK

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments