manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 229 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 229

Settings and Printing

Network

Network

Maintenance and Spec.

Setup in Windows

Settings and Printing

Network

Network

Maintenance and Spec.

44

■

Step 3: Setting up the printer driver and the printer port on the 

computer

If the printer driver is already installed on you computer, see 

page 47

.

■

If the printer driver is not installed,

First install the printer driver and then set up the printer port as follows:

1

Insert the printer CD-ROM into the CD-ROM drive.

The CD-ROM launches automatically.

NOTE

• If the CD-ROM does not launch automatically, perform the following steps (1) – (2).

(1)Double click My computer icon.
(2)Double click the CD-ROM icon.

2

Click KX-P7110.

3

Click Install Printer driver and Utilities.

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments