Panasonic KX-P7105 Operating Instructions Manual Download Page 245

Page: 245 / 312

Settings and Printing

Network

Maintenance and Spec.

Setup in Windows

Settings and Printing

Network

Maintenance and Spec.

■

Step 3: Setting up the printer driver and the printer port on the

computer

If the printer driver is already installed on your computer, see below.

■

If the printer driver is not installed,

Refer to

“Step 3: Setting up the printer driver and the printer port on the computer” on page

in “Using NetBEUI in Windows 95 / Windows 98 / Windows Me”.

■

If the printer driver is already installed,

Set up the printer port as follows:

Click ,

select

Settings and then click Printers.

Click the printer with the right mouse button.

Click Properties.

Click the Ports tab.

Click .

Select Local Port, then click

The Port Name window is displayed.

Start

Add Port...

New Port...

Summary of Contents for KX-P7105

























































































































































































































































































































Search results

Summary of Contents for KX-P7105

Reviews:

Panasonic KX-P7105, Operating Instructions Manual, Page: 245 / 312

Search results

Summary of Contents for KX-P7105

Reviews: