Home
/
Panasonic
/
KX-P7105
/
Operating Instructions Manual

Panasonic KX-P7105, Operating Instructions Manual, Page: 169 / 312

Share

Page: 169 / 312

Panasonic KX-P7105 Operating Instructions Manual Download Page 169

Repacking Instructions

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

43

3

Lift the drum unit up (

#

) and slide it out of the printer (

$

).

•To avoid possible toner spillage, it is recommended to place the drum unit on a news-

paper, drop cloth or best to place back in original (Black) shipping bag.

CAUTION

• To prevent any damage to the drum unit, observe the following precautions.

— Do not touch the black drum surface illustrated below.
— Do not expose the drum unit to light for more than 5 minutes.
— Do not expose the drum unit to direct sunlight.
— Do not keep the drum unit near dust or dirt.
— Do not place the drum unit in a high humid area.

#

$

#

Black drum

«
...
167
168
169
170
171
...
»

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments