manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 309 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 309

 

Settings and Printing

Network

Network

Maintenance and Spec.

 

Appendix

Settings and Printing

Network

Network

Maintenance and Spec.

 

124

 

■

 

 NetWare

 

Primary Server

0.0.0.0

Sets WINS server (primary) address. The 
Computer Name of the NetBEUI/NetBIOS 
is used for NETBIOS name

Secondary Server

0.0.0.0

Sets WINS server (secondary) address. 
The Computer Name of the NetBEUI/
NetBIOS is used for NETBIOS name

Scope ID

NULL

Sets Scope IP.

 

name

Factory Default

Description

 

Use NetWare Protocol

ENABLE

Enables or disables NetWare printing.

Frame Type

802.2

Sets default Frame type used by KX-
P7110. If KX-P7110 does not work with 
the frame type, it will be automatically 
changed to different type.

Printer Name

KXPxxxxxx-
Printer

Sets printer name which is registered to 
NetWare server. This  name must be the 
same as the printer name registered to 
NetWare server.

Operation Mode

PSERVER

Sets operation mode (PSERVER or 
RPRINTER). If KX-P7110 does not work 
with the operation mode, it will be 
automatically changed to diffrerent mode.

PSERVER Mode

ENABLE

Enables or disables Print Server mode.

Print Server Name

KXPxxxxxx

Sets print server name for PSERVER 
mode.

Password

NULL

Sets the password to login to the file 
server.

 

Name

Factory Default

Description

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments