manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 312 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 312

Settings and Printing

Network

Network

Maintenance and Spec.

Appendix

Settings and Printing

Network

Network

Maintenance and Spec.

127

■

 Printer Port

name

Factory Default

Description

lp Port

BOJ String

NULL

Sets the string that will be sent before 
sending a print job to the direct output 
port(lp).

EOJ String

NULL

Sets the string that will be sent at the end 
of a print job to the direct output port(lp).

enc/sjis Port

BOJ String

NULL

Sets the string sent before sending the 
printing job to the output port via Kanji 
filter(sjis, euc).

EOJ String

\f

Sets the string that will be sent at the end 
of the printing job to the output port via 
Kanji filter (sjis, euc).

Printer Emulation

ASCII

Sets printer emulation (PDL). Changes to 
appropriate code when printing via Kanji 
filter (sjis, euc).

Tab Size

8 char

Sets the number of spaces that 
correspond to 1 tab. All tab codes will be 
converted to the spaces according to the 
number set here. This feature will not be 
available when this is set to "0" or when 
the job is directly sent to the printer.

Page Width

0 char

Sets the number of characters for the auto 
line feed feature of the Kanji filter. The 
auto line feed feature is not available 
when this is set to "0".

Page Length

0 line

Sets the number of lines for auto page 
feed feature of the Kanji filter between the 
number 0-255. The auto page feed 
feature is not available when this is set to 
"0".

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments