manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 160 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 160

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

34

Frequent media-picking 
errors occur.

The length media guide of the 
media tray is not set correctly.

Check the length media guide is 
set to the groove indicating the 
media size.

Check the loaded media is not 
curled.

The media is not set correctly in 
the media tray.

Check the media is not set on the 
media height stopper (A) of the 
length media guide.

Pick up roller is dirty.

Clean the pick up roller (

see 

“Cleaning the Printer” on page 
10

).

Image is cut.

Image size is bigger than print 
area.

Adjust the image within the print 
area (

see “Margins and Print 

Area” on page 12

 in “Settings 

and Printing”).

Trouble

Possible Cause

Corrective Action

A

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments