manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 278 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 278

Settings and Printing 

Network

Network

Maintenance and Spec.

Setup in NetWare

Settings and Printing 

Network

Network

Maintenance and Spec.

93

■

Using the Bindery - PSERVER Mode

First install the Adminmamanager by using the printer CD-ROM and then set up the printer.

1 

Start the server system.

2 

Start the client system and login into the network in the Bindery mode.

• If the Adminmamanager is already installed, click 

, move the pointer to

Programs, Panasonic and Panasonic KX-P7105 and KX-P7110, then click
Network Setup Tool. Proceed to step 7.

3 

Insert the printer CD-ROM into the CD-ROM drive.

The CD-ROM launches automatically.

NOTE

• If the CD-ROM does not launch automatically, perform the following steps (1) – (2).

(1)Double click My computer icon.
(2)Double click the CD-ROM icon.

4 

Click KX-P7110.

Start

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments