Panasonic KX-P7105 Operating Instructions Manual Download Page 156

Page: 156 / 312

Troubleshooting

Settings and Printing

Network

Maintenance and Spec.

Small dots are printed
at the different position
from the original

Media is wet or dry.

Set the Adjustment to media
setting for – value (–1, –2 or
–3) (

see “Adjustment to Media”

on page 35

in “Settings and

Printing”).

Toner spots appear on
the page.

Toner spots put on the
photosensitive drum.

Clean the toner spots with soft
cloth (refer to

“Cleaning the

Photosensitive Drum” on page
37

The drum unit is damaged.

Replace the drum unit.

The corona wire in the drum unit is
dirty.

Clean the corona wire in the drum
unit (

see “Cleaning the Printer”

on page 10

The entire page prints in
black.

The drum unit is damaged.

Replace the drum unit.

Trouble

Possible Cause

Corrective Action

ABCD--------
-----------------
--------

Summary of Contents for KX-P7105

























































































































































































































































































































Search results

Summary of Contents for KX-P7105

Reviews:

Panasonic KX-P7105, Operating Instructions Manual, Page: 156 / 312

Search results

Summary of Contents for KX-P7105

Reviews: