manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 297 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 297

Settings and Printing

Network

Network

Maintenance and Spec.

Setup in UNIX

Settings and Printing

Network

Network

Maintenance and Spec.

112

■

For BSD UNIX  

The following is an example for Sun OS4.1.3. The command and paths may differ depending
on the OS version. Please refer to the workstation manual.

1

Create printer queue.

(1) Login as root.

# login root

(2) Add an entry for the printer in /etc/printcap file.

kxp7110lp:¥
:lp=:¥
:rm=kxp7110:¥
:rp=lp:¥
:sd=/usr/spool/kxp7110lp:¥
:lf=/usr/spool/kxp7110lp/kxp7110lp_errs:

<Description of each parameter>
lp : device name to open. Not required.
rm : remote printer host name. Enter host name added to /etc/hosts file.
rp : printer name of remote printer. Enter “lp” in this case.
sd : spool directory.
lf : error log file.

For more information, refer to your UNIX manual.

(3) Create and set up the spool directory and error log file.

# mkdir /usr/spool/kxp7110lp
# touch /usr/spool/kxp7110lp_erra

# chown -R daemon /usr/spool/kxp7110lp
# chgrp -R daemon /usr/spool/kxp7110lp

(4) Check lpd function.

# pa aux | grep lpd

(5) Validate created printer queue.

# lpc restart kxp7110lp

2

Print

•Print using “lpr” command.

# lpr –p kxp7110l @<file name>

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments