manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 298 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 298

Settings and Printing

Network

Network

Maintenance and Spec.

Setup in UNIX

Settings and Printing

Network

Network

Maintenance and Spec.

113

FTP (File Transfer Protocol) is a protocol for transferring files installed on TCP/IP systems.

Perform the following steps.

1

Log into the printer.

Example: 
# ftp PANA (or ftp 172.16.xxx.xxx)
Connected to PANA.
220

KX-P7110 Ver 1.0.0 FTP Server

User(PANA:root): root
331 Password required.
Password: 
230 User Logged in.
ftp>

2

Change the directory to remote print directory using “cd” command.

ftp>cd /lp
250 Command ok.
ftp>

3

Change transfer mode.

There are two transfer mode. The “ASCII mode” changes LF code to CD+LF code 
and the “Binary mode” puts out the file contents as they are. 

Example: Change the transfer mode to Binary mode and display current mode.
ftp>type binary
200 Type set to I.
ftp>type
Using binary mode to transfer files.
ftp>

4

Use put command to send print data to the printer.

Example: Transfer print data “test.prn”.
ftp>put test.prn

Printing using FTP

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments