manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 239 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 239

Settings and Printing

Network

Network

Maintenance and Spec.

Setup in Windows

Settings and Printing

Network

Network

Maintenance and Spec.

54

7

Click LPR Port from Directly print to KX-P7110 list.

Then click 

.

NOTE

• If the LPR Port is not appeared, install the Microsoft TCP/IP Printing service in the

Network property (

see “Step 3: Installing the LPR port on the computer” on page 50

).

8

Enter the IP address or host name of the printer in the Name or address
of server providing lpd box.
Enter “lp” in the Name of printer or print queue on that server box.

Then click 

.

 

9

Follow the instructions on the screen.

Next>

OK

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments