manualshive.com logo in svg

Panasonic KX-P7105, Operating Instructions Manual, Page: 134 / 312

Share
Download
Panasonic KX-P7105 Operating Instructions Manual Download Page 134

 

Upgrade Options

Settings and Printing

Network

Maintenance and Spec.

Maintenance and Spec.

 

8

 

If you install the RAM board, set the printer driver for the printer’s installed memory (see

“Setting the Device Options”

 below).

If you install the Upgrade Kit (for PostScript), install the printer driver for PostScript and set it.
To install the printer driver for PostScript in Windows or Macintosh, refer to the Setup Guide.
To set the printer driver in Windows, see 

 “Setting the Printer Driver for PostScript in Windows”

on page 9

. To set the printer driver in Macintosh, see “Macintosh” of “Settings and Printing” in

the Operating Instructions.

 

■

 

Setting the Device Options

 

• Printer driver for PCL:

 

(1) Click the 

 

Device 

 

tab (Windows 95

 

*

 

1

 

/Windows 98

 

*

 

2

 

/Windows Me

 

*

 

3

 

) or 

 

Device

Settings 

 

tab (Windows NT® 4.0

 

*

 

4

 

 or Windows 2000

 

*

 

5

 

).

(2) Change the installed memory of the printer.

 

• Printer driver for PostScript in Windows:

 

Refer to the help menu in Windows.

 

• Printer driver for PostScript in Macintosh:

 

See “

see “Setting the Installable Options” on page 116

 in “Macintosh” of “Settings and

Printing”.

 

*

 

1

 

Microsoft® Windows® 95 operating system (hereafter Windows 95)

 

*

 

2

 

 

 

Microsoft® Windows® 98 operating system (hereafter Windows 98)

 

*

 

3

 

 

 

Microsoft® Windows® Millennium Edition operating system (hereafter Windows Me)

 

*

 

4

 

 

 

Microsoft® Windows NT® operating system Version 4.0 (hereafter Windows NT 4.0)

 

*

 

5

 

 

 

Microsoft® Windows® 2000 operating system (hereafter Windows 2000)

 

Setting the Printer Driver

Summary of Contents for KX-P7105

























































































































































































































































































































Reviews:

No comments