Panasonic FZ-G1 Series Operating Instructions - Reference Manual Download Page 86

Page: 86 / 145

Magnetic Stripe Card Reader

You need software to use a Magnetic Stripe Card Reader.

C A U TI O N

Do not:

Hit, bend, or drop the card.

Touch the contact part with fingers or metal object.

Place the card in very hot location for a long time.

Remove the card immediately after inserting it.

Reading Magnetic Stripe Card

Insert the magnetic tape part of the card into this unit's card reading part and slide it.

Face the magnetic tape of the card to the computer side.

You can slide the card from both sides to read.

N O T E

Slide the card parallel to the rail.

Slide the card at a constant speed.

Inserting the card at an angle to slide or removing the card at an angle after insertion may lead to incorrect reading.

Summary of Contents for FZ-G1 Series


















































































































































Search results

Summary of Contents for FZ-G1 Series

Reviews:

Related manuals for FZ-G1 Series

Brands by name

Popular brands

Panasonic FZ-G1 Series, Operating Instructions - Reference Manual

Search results

Summary of Contents for FZ-G1 Series

Reviews:

Related manuals for FZ-G1 Series

Brands by name

Popular brands