Panasonic FZ-G1 Series Operating Instructions - Reference Manual Download Page 25

Page: 25 / 145

Tablet Buttons

Button

Function

Power

Start/Turn off the computer.

Windows

Same as Windows key.

N O T E

The Windows button does not function when pressed together with a specific key on the external keyboard.

You can enable or disable the key with Setup Utility.

Volume

N O T E

You can set the key to either Volume Up/Down or Brightness Up/Down with Setup Utility.

Rotation Lock (

Display Rotation

)

Automatic display rotation ON/OFF.

Panasonic PC Settings Utility ON/OFF.

<Only when

[Concealed Mode]

is set to [Enabled]>

Concealed Mode ON/OFF. (

Concealed Mode

)

You can select on/off of LCD backlight, LED, Sound, Wireless Radio, Fan, Camera light

, Camera Flash

and Barcode

Reader light

. The camera indicator cannot be turned off.

*1 : Only for model with Rear Camera.
*2 : Only for model with Barcode Reader.

N O T E

You have to set [Concealed Mode] to [Enabled] in Setup Utility to control Concealed Mode with this button operation.

You can set the devices turned off in [Concealed Mode] with Setup Utility.

If you press

in succession, the Concealed Mode may not be switched. More than 4 seconds interval is necessary

to switch on/off.

Read the barcode.

Touch keyboard appears.

N O T E

You can use the Tablet buttons instead of following keys when the Windows screen is not displayed.

Summary of Contents for FZ-G1 Series


















































































































































Search results

Summary of Contents for FZ-G1 Series

Reviews:

Related manuals for FZ-G1 Series

Brands by name

Popular brands

Panasonic FZ-G1 Series, Operating Instructions - Reference Manual

Search results

Summary of Contents for FZ-G1 Series

Reviews:

Related manuals for FZ-G1 Series

Brands by name

Popular brands