![background image](http://html.mh-extra.com/html/panasonic/fz-g1-series/fz-g1-series_operating-instructions-reference-manual_264483005.webp)
1.
Touch
(Start) - [Windows System] - [Control Panel].
Alternatively, touch
(All apps) - [Windows System] - [Control Panel] in the tablet mode.
Opening the “Settings” screen
1.
Touch
(Start) -
(Settings).
Alternatively, touch
(Settings) in the tablet mode.
Opening the Panasonic PC Settings Utility
On the Start screen, proceed as follows.
1.
Touch
(Start) -
(Panasonic PC Settings Utility).
Alternatively, touch
(Panasonic PC Settings Utility) in the tablet mode.
Notification area
The notification area is on the right side of the screen.
To display the notification, touch
(Notification) on the task tray.
Latest Information on Windows 10
When Windows 10 is updated, the screen display or operation procedures may be changed.
For the latest information on Windows 10, see the following web page.
https://pc-dl.panasonic.co.jp/itn/addendum/
Sound and Video
Sound (e.g. MP3, WMA) and video (e.g. MPG, WMV) recorded in microSD Memory Card may be interrupted during playback. If this
happens, copy them to the flash memory drive and play back.
Depending on the processing status on Windows, sound may be interrupted at Windows startup. You can mute the sound at startup.
The startup sound is muted as the factory default.
1.
Touch and hold
(Speaker) on the task tray, and touch [Sounds].
2.
Remove the check mark from [Play Windows Startup sound], and touch [OK].
When high-frequency sound occurs
If high-frequency sound occurs while using the computer, check the settings for the USB power saving function.
Set [USB selective suspend setting] to [Enabled].
1.
Touch
(Start) -
(Settings) - [System] - [Power & sleep] - [Additional power settings].
Alternatively, touch
(Settings) - [System] - [Power & sleep] - [Additional power settings] in the tablet mode.
2.
Touch [Change plan settings] of the current power plan.
3.
Touch [Change advanced power settings].
4.
In [Advanced settings], double-touch [USB settings].
5.
Double-touch the displayed [USB selective suspend setting].
6.
Change settings of [On battery] and [Plugged in] to [Enabled].
7.
Touch [OK] and exit the “Power Options” screen.
-
5
-