Battery Power
Battery Indicator
Battery indicator (A):
Battery indicator
Battery status
Not lit
The battery pack is not inserted or not being charged.
is set to ON.
Orange
Charging is in progress.
If
in the [Main] menu of the Setup Utility is set to [Flashing], the indicator will altern-
ately become lighter and darker (Flashing).
Green
The battery is fully-charged.
Blinking green
In order to stop the battery from deteriorating, power supply from AC adaptor has been shut off, and the battery
power is being consumed. Do not remove the battery pack in this status.
Red
The remaining battery is approximately 9% or less.
Blinking red
The battery pack or the charging circuit is not operating properly. Remove the battery pack immediately.
Blinking orange
The battery cannot be charged temporarily due to the following reasons:
Its internal temperature is out of the acceptable range.
The power supply is not enough because software applications or peripheral devices are consuming a
large amount of power.
Blinking green and orange altern-
ately
The temperature is low and the computer is warming up to prevent the flash memory drive from malfunctioning.
The computer will start automatically after warming-up.
Blinking orange slowly
When you set
to [Flashing] on the “Main” menu of Setup Utility.
<Only for model with Built-in Bridge Battery>
Battery indicator (B)
Latch (C)
-
30
-
