Panasonic FP2 -AD8 Manual Download Page 12

Page: 12 / 121

FP2 Analog Unit

Functions and Restrictions

1 - 6

1.3

Data Processing Functions

1.3.2

Analog Output

For analog output, there is the “Analog output hold function.”

1.3.2.1

Analog Output Hold Function

Non-hold, hold (final value during RUN mode), and hold (any value) for the analog

output during the FP2 CPU unit PROG. mode can be set by the shared memory

settings.
For hold (final value during RUN mode), the analog output value is held corresponding

to the final digital data written during the RUN mode before changing to the FP2 CPU

unit PROG. mode.
For hold (any value), the analog output value is held corresponding to the hold data (any

value) set in the shared memory when changing to the FP2 CPU unit PROG. mode.

Note

When set to either hold (final value duringl RUN mode) or hold

(any value), the each analog output is held during stops in

operatiohn due to FP2 CPU unit hardware malfunctions or

operation delays.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for FP2 -AD8


























































































































Search results

Summary of Contents for FP2 -AD8

Reviews:

Related manuals for FP2 -AD8

Brands by name

Popular brands

Panasonic FP2 -AD8, Manual

Search results

Summary of Contents for FP2 -AD8

Reviews:

Related manuals for FP2 -AD8

Brands by name

Popular brands