Panasonic FP-E Programming Manual Download Page 77

Page: 77 / 1334

1.3 Explanation of Memory Areas

1 - 53

Available range of link data registers

The available range of link data registers varies depending on the type of network and

the combination of units. The available range and number of points must be specified

separately for each network.
For MEWNET

−

W and MEWNET

−

A maximum of 128 words can be used with one link unit. The available range is from

LD0 to LD127 for the first unit (PC Link 0), and from LD128 to LD255 for the second unit

(PC Link 1).

For MEWNET

−

W2:

A maximum of 4,096 words can be used per link unit. Please set the range of use at the

MEWNET

−

W2 settings menu.

With the FP2SH, the range between LD0 and LD8447 can be specified. When used

with MEWNET

−

W the range between LD0 and LD255 cannot be used.

With the FP2, the range between LD0 and LD255 can be specified. Also, the data

−

W2 setting menu.

However, when used with MEWNET

−

W the range between LD0 and LD255 cannot be

used with MEWNET

−

W2.

For MEWNET

−

A maximum of 8,192 words can be used. Please set the range to be used with the

MEWNET

−

H link setting software.

With the FP10SH, the range from LD0 to LD8447 can be used.

If used in conjunction with a MEWNET

−

W or MEWNET

−

P link unit, be aware that the

range from LD0 to LD255 cannot be used.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for FP-E























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FP-E

Reviews:

Panasonic FP-E, Programming Manual, Page: 77 / 1334

Search results

Summary of Contents for FP-E

Reviews: