Panasonic FP-E Programming Manual Download Page 102

Page: 102 / 1334

Relays, Memory Areas and Constants

1 - 78

3) Direct specification of the real

−

number constant data

When operations are being carried out on real

−

number constants as real

−

number data,

the values can be directly input by using a programming tool in which “f” is added either

to the target data “S” or the destination “D” defined by the instruction.

The range that can be specified by these instructions is 0.0000001 to 9999999 (the

effective value consists of seven digits).

Example:

Specifying the target data “S” with a real

−

number constant

The real

−

number data stored in DT10 and DT11 is multiplied

by the real

−

number constant 0.5, and the result of the

operation stored in DT20 and DT21 as real

−

number data.

F312 f

DT10, f0.5, DT20

4) Specifying a K constant for conversion

The K constant (32

−

bit data) is an integer data element, so it is automatically converted

to real

−

number data and the operation is executed.

F310 F+, K10, DT50, DT60

Automatic conversion to real number

5) Specifying an H constant for conversion

With an H constant (32

−

bit data), the operation is carried out using the H constant as

floating point data.

Operation if an overflow occurs

If the operation result exceeds the real

−

number range, an overflow flag (R9009) is set.

If this occurs, one of the values noted below is set for R9009 as a result.

Positive infinite value: H7F800000

Negative infinite value: HFF800000

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Summary of Contents for FP-E























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FP-E

Reviews:

Panasonic FP-E, Programming Manual, Page: 102 / 1334

Search results

Summary of Contents for FP-E

Reviews: