Panasonic Firetracker FT1020G3 CIE, Operation Manual

Page: 59 / 180

59
Operation Manual
FT1020G3 Rev 2.10.4
Example; fire alarm zone 002, address 03 (within zone 002):
The presentation number is automatically followed by: SMOKE, HEAT, MULTI or MCP
depending on the type of alarm point.
More than one alarm point activating fire alarm.
Example; fire alarm in zone 002, address 03 (within zone 002) and nine other fire alarms
(of which the latest alarm is 003-11) in four different zones:
User definable alarm text, for each alarm point and zone line input, an individual alarm
text can be shown. Each zone has its own individual alarm text (if programmed). Up to 40
alphanumeric characters can be used.
Additional information
First alarm, Latest alarm, Alarm number and number of zones in alarm.
LEDs " SEVERAL ALARMS " blinking (0.4 / 0.4 sec.) indicates that more than one fire alarm
is activated. To scroll through the alarm points, use the push button "SEVERAL ALARMS".
Next zone
. Use the soft key "Next zone" to scroll through the
zones
in alarm.
When scrolling through the zones, the first alarm point activated in the next zone will be
shown. The "Next zone" button will be available only if there are alarms in more than one
zone.
The first alarm will be automatically displayed again, 20 seconds after the latest time the
"SEVERAL ALARMS" or "Next zone" buttons where used.
To
reset fire alarms, see chapter "Alarm reset", page 68.
Fire alarm: 002-03 Alarm number 1 (of 1)
Pre-
002-03
SMOKE
User definable alarm text for 002-03
Zone Addres
1 zone in alarm
Menu
Fire alarm: 002-03 Alarm number 1 (of 10)
Pre-warning
002-03
SMOKE
User definable alarm text for 002-03
Zone Addres s
Latest alarm: 003-11 4 zone in
Menu