128
Operation Manual
FT1020G3 Rev 2.10.4
25.3
Open Doors (H4/U3)
If any door in the system is open, the door open symbol
is shown in the symbol area of
the display.
See also chapter "Open door” page 56.
This menu is a dynamic list of all open doors in the system.
Action
Text in display
Comments
"Menu"
According to chapter
"Access", see page 42.
Scroll to menu H4.
H4 Present system status
"
↲
"
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
All open doors in the
system will be shown in
menu U3.
Press "
↲
".
Scroll to menu U3.
U3 Open doors
"
↲
"
Door open control unit 00
dd-mm-yyyy hh:mm
Door open control unit 01
fire brigade panel 00
dd-mm-yyyy hh:mm
....
....
Open door 1 to 2 of 2
It is a dynamic list in
which you can scroll
with "▼" or "▲".
"ESC"
U3 Open doors
Scroll to another menu
or press "ESC".
Summary of Contents for Firetracker FT1020G3 CIE
Page 1: ...Operation Manual FT1020G3 Rev 2 10 4 For Software V2 10 4 FT1020G3 FDCIE MA430 March 2023...
Page 2: ...This page has deliberately been left blank...
Page 176: ...176 Operation Manual FT1020G3 Rev 2 10 4 Figure 24 FT1020G3 Standard Block Wiring Diagram...
Page 177: ...177 Operation Manual FT1020G3 Rev 2 10 4 Figure 25 FT1020G3 New 5012 PCB Layout...
