Panasonic Firetracker FT1020G3 CIE, Operation Manual

Page: 16 / 180

16
Operation Manual
FT1020G3 Rev 2.10.4
3.2 FT1020G3 Limitations
Some limitations have been increased as well as adding new types. The following table
lists some of the limitations in V2.10.x software.
Table 3 Control Unit limitations
Item Loop FDCIE Network System
General fire alarm via programmable input 100 30 x 100
External fault via programmable input 100 30 x 50
Programmable inputs 512 30 x 512
Programmable outputs (= control expressions) 512 30 x 512
Technical warnings 200 30 x 100
Addressable 2 voltage outputs unit 3364 40 30 x 40
Interlocking Combinations 400 4000
Presentation numbers / alarm points that can be presented
in the display(s) in case of fire alarm
255 512 512
Presentation numbers that can be programmed 512 30 x 512 = 15 360
Zones that can be programmed 255 512 999
Zone Group 64 64
Faults 300
Disabled Zones 512
Disabled Alarm Points (zone/address) + Disabled COM loops 200
6
Disabled Outputs 200
7
Disabled Interlocking Outputs 200
Sensors activating SERVICE signal 200
LAA zones (Max. 5 detectors per AAF zone.) 100 30 x 100
Total number of Expansion Boards 4580 and 4581
8
6 30 x 6
Number of I/O Matrix Boards 4582
9
24 30 x 24
Total number of 4582 for Zone Control & Generic applications 6 30 x 6
Maximum number of remote display units 5054 (1728 / 1736) 30 30 x 30
Maximum number of 19” rack fan/damper modules with built-
in 4582 (4 fan/damper for each module)
24 30 x 24
Maximum number of 19” rack zone modules with built-in 4582
(15 zone)
6 30 x 6
Note : The addresses 254 and 255 in each loop are reserved for auto addressing purposes and
cannot be used. If these addresses are used there will be a fault in the "Validity check".
6 Zone/address disabled via time channel not included.
7 Control outputs disabled via menu H2/B3 and Alarm devices disabled via menu H2/B4 are not included.
8 Expansion boards 4580 and 4581 are physical connected to COM loop 0
9
Reduce no. of 4582 boards by one for every Expansion Board used (4580 or 4581), applicable to 19” rack
modules for zone control and fan / damper control.