Panasonic Firetracker FT1020G3 CIE Operation Manual Download Page 132

Page: 132 / 180

132

Operation Manual

FT1020G3 Rev 2.10.4

25.6

Technical Warning (H4/U6)

A technical warning is an event that is neither a fire alarm nor a fault. It is information to

indicate that an event has occurred as a result of activating a programmable input. The text

message, shown in the FDCIE display, is user definable message (up to 40 characters).
One or more activated technical warnings are indicated by

in the display's symbol area.

Action

Text in display

Comments

"Menu"

According to chapter

"Access", see page 42.

Scroll to menu H4.

H4 Present system status

↲

U1 Disablement

U2 Disablement by time channel

U3 Open doors

U4 Sensor values

U5 Sensors activating SERVICE signal

U6 Technical warning

U7 Event log

U8 Information

Scroll to menu U6.

U6 Technical warning

↲

Technical warning text message

19-02-2013 09:09:15
(User definable text message)

19-02-2013 19:09:35

1 to 2 of 2

If there are no technical

warnings, --List is

empty-- will be shown.

It is a list in which you

can scroll with "▼" or

"▲".

ESC

U6 Technical warning

Scroll to another menu

or press "ESC".

Note

: The technical warnings are normally non-latching, but can via EBLWin be set to be

"latched".
If a programmable input is activated with a latched technical warning, the technical warning

must be reset via this menu.
Technical warnings can be used to activate programmable output.

Note

: Three new features are provided in software versions ≥ V2.8.x. A technical warning

can be set via 3 check boxes for the following:

1.  Show technical warning on the main screen.
2.  Technical warning latched.
3.  Turn the FDCIE buzzer ON when technical warning is activated.

Summary of Contents for Firetracker FT1020G3 CIE





















































































































































































Search results

Summary of Contents for Firetracker FT1020G3 CIE

Reviews:

Related manuals for Firetracker FT1020G3 CIE

Brands by name

Popular brands

Panasonic Firetracker FT1020G3 CIE, Operation Manual

Search results

Summary of Contents for Firetracker FT1020G3 CIE

Reviews:

Related manuals for Firetracker FT1020G3 CIE

Brands by name

Popular brands