12
Operation Manual
FT1020G3 Rev 2.10.4
Router or Repeater is the same type of unit (different
configuration). All network programming (configuration) is
configured using the PC program “TLON Manager”. See also
separate TLON Manager Technical Manual.
Nuisance alarms
False or unwanted alarms
LED
LED (Light Emitting Diode) = Yellow, green or red optical indicator
("lamp").
External Indicator / RIL
A unit with a red LED connected to a base (ASB / CDB) or a
detector with an output for a remote indicator RIL.
Lit when the built-in LED in the detector / base is lit.
Display / LCD
LCD (Liquid Crystal Display) = Display (in the FDCIE or Display
unit) for presentation of fire alarms, fault messages, etc. In
FT1020G3 it is a graphical monochrome LCD (320 x 240 dots)
with backlight.
Door open (Door / Key switch)
In FT1020G3 there is a door switch, which is activated when the
FDCIE door is open. Door open feature can be used to disable
fault, strobes or OWS.
An open door is indicated in the LCD (i.e. an "open door" icon).
Site Specific Data (SSD)
The SSD is unique for each system. All alarm points, presentation
numbers, user definable alarm texts, programmable outputs, etc.
are created in the PC program EBLWin and also downloaded in
FT1020G3 unit(s) with EBLWin.
Software (S/W) / Firmware / System
program
The software (S/W) – also called Firmware and System program –
makes the control unit (the microprocessor) work. It is factory
downloaded but another / new version can be downloaded in
FT1020G3 on site using the PC program EBLWin.
EBLWin
PC program used to create and download the SSD in FT1020G3
unit(s). Also used to download another / new software version and
to upgrade the maximum number of alarm points in FT1020G3.
Can be used during commissioning / maintenance of FT1020G3
system (auto address, check loop, acknowledge faults, etc.)
Web-server / Gateway
The Web-server / Gateway is used to get FT1020G3 information
as well as remote control via a PC (browser) and an intranet /
internet. The Web-server / Gateway is configured via the PC tool
EBLWin.
EBL Firmware Manager
PC program, used to download another / new software version.
Multi master system
Each control unit in a network has access to all information.
Note:
The TLON configuration must be performed prior creating the Site Specific Data
(SSD).
Summary of Contents for Firetracker FT1020G3 CIE
Page 1: ...Operation Manual FT1020G3 Rev 2 10 4 For Software V2 10 4 FT1020G3 FDCIE MA430 March 2023...
Page 2: ...This page has deliberately been left blank...
Page 176: ...176 Operation Manual FT1020G3 Rev 2 10 4 Figure 24 FT1020G3 Standard Block Wiring Diagram...
Page 177: ...177 Operation Manual FT1020G3 Rev 2 10 4 Figure 25 FT1020G3 New 5012 PCB Layout...
