background image

23

Key Combinations

You can make two settings:

Fn key lock

 

When you press 

Fn

, the key is locked (pressed-down) until you press another key. Use this when pressing difficult key 

combinations.

• Pop-up icon on/off

1

Start up the Hotkey Settings.

Click [start] - [All Programs] - [Panasonic] - [Hotkey Settings].

2

Make the settings.

[Use Fn key lock]

z

When using an 

Fn

 key combination

A

Press 

Fn

 once. (Locked)

B

Press another key. (Lock released)

z

When using successive 

Fn

 key combinations

A

Press 

Fn

 twice. (Locked)

B

Press another key.

 

Fn key remains locked until you press 

Fn

 again.

[Notification]

[Make sounds when Fn key is pressed]

*1

[Show status on screen]: Displays the Fn key status on the notification area.

Fn

 is locked.

Fn

 is not locked.

[Disable popup]

The Pop-up icon will not be displayed.

3

Click [OK].

NOTE

z

You can have different settings for each user.

*1

If the speakers are muted, beeps do not sound.

Hotkey Settings

Summary of Contents for CF-F8 Series













































































































































Reviews: