Panasonic CF-F8 Series Reference Manual Download Page 80

Page: 80 / 140

Modem

CAUTION

Be sure to connect the telephone cable into the modem port, not into the LAN port.

Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.

Connect the computer and the telephone jack (A) using the
telephone cable (included: B).

Hold the cable so that the shape of the connector (C) matches the port, and
insert fully until it clicks.

Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] and change the settings as nec-
essary.

NOTE

Do not enter standby or hibernation during communications.

To remove the cable, press and hold the lever and pull out.

CF-F8 Series

CF-W8/CF-T8 Series

Summary of Contents for CF-F8 Series













































































































































Search results

Summary of Contents for CF-F8 Series

Reviews:

Related manuals for CF-F8 Series

Brands by name

Popular brands

Panasonic CF-F8 Series, Reference Manual

Search results

Summary of Contents for CF-F8 Series

Reviews:

Related manuals for CF-F8 Series

Brands by name

Popular brands