Panasonic AJ-YA120AG, Service Manual

Page: 420 / 647

MECH-30
2-6. Replacement of Capstan Unit
(Removal)
1. Disconnect the connector on the MECHA I/F Board.
(rear side of the Mechanical Chassis)
2. Unscrew the 3 screws (A) as shown in Fig. 2-6-1
and then remove the Capstan Unit from the lower
side of Mechanical Chassis.
(Installation)
1. Install the new Capstan Unit in reverse steps of the
removal..
Fig. 2-6-1
2-7. Replacement and Adjustment
of A/C Head Unit
(Removal)
1. Unscrew the spring screw(A) as shown in Fig.s
2-7-1 and 2-7-2 and then remove the A/C Head 1
Unit.
(Installation)
1. Install the A/C Head 1 Unit in reverse steps of the
removal. Tighten the screw (A) with 10cN·m
(1Kgf·m) torque.
2. Clean the surface of A/C Head.
Fig. 2-7-1
Fig. 2-7-2
Screw A
Capstan Unit
Screw A
A/C Head 1 Unit
A/C Head
Screw A