Panasonic AJ-YA120AG, Service Manual

Page: 306 / 647

MECH-36
2-14. T Loading Unit Replacement
(Removal)
1. Remove the S Loading Arm Unit. (Refer to 2-13)
2. Remove the Cut Washer F and a Washer to
remove the T Loading Unit. (Fig.2-13-2)
Fig. 2-14-1
(Installation)
1. Install a new T Loading Unit in the reverse steps
of the removal.
2. The hole (G) and (H) should be geared.
(Fig.2-14-2)
Fig.2-14-2
2-15. T6 Arm Unit Replacement
(Removal)
1. Remove the Cut Washer A and a Washer to
remove the T6 Arm Unit. (Fig.2-15-1)
(Installation)
1. Install a new T6 Arm Unit in the reverse steps of
the removal.
2. The Post Height Pre-adjustment and the Linearity
Adjustment are required.
Fig.2-15-1
2-16. T5 Arm Unit Replacement
(Removal)
1. Remove the T6 Arm Unit. (Refer to 2-15)
2. Remove the Pinch Solenoid Unit. (Refer to 2-4)
3. Unscrew the 2 screws B, and the T Tension Base
Unit. (Fig.2-15-1)
4. Remove the Cut Washer C and a Washer to
remove the T5 Arm Unit. (Fig.2-15-1)
(Installation)
1. Install a new T5 Arm Unit in the reverse steps of
the removal. Make sure the position where the
spring hooks.
2. The Post Height Pre-adjustment and the Linearity
Adjustment are required.