Panasonic AJ-YA120AG, Service Manual

Page: 236 / 647

INF-14
HDLP
CH1
CH2
Mode Segment of Audio Meter
HDLP LED LIT : 7 Segments or Less
HDSP LED LIT : 6 Segments or Less
SDSP LED LIT : 6 Segments or Less
DVSP LED LIT : 6 Segments or Less
Error Rate:
HDSP, SDSP,
DV
8-2. Non Track Error Rate Display Procedure (Total Error Rate/All Format)
1. Perform the steps 1 to 6 of “8-1. On Track Error Rate Display Procedure”.
2. Move the cursor
(*) to the “ECC DISPLAY” by using the “UP” and “Down” Buttons, and then select
“NORMAL” and press the “MODE” button.
3. The Video and Audio can be selected by pressing the “COUNTER” switch.
4. Each time when the “COUNTER” button on the front panel is pressed, the display mode will be changed
from the mode 1 to 2 and 2 to 1.
5. The error rate value can be confirmed as shown figure 8-1-3.
6. The error rate display is cancelled when the”
LOCAL/MENU/REMOTE ” switch on the front panel is set to the
“LOCAL” or “REMOTE” .
Audio Indication
Display Mode
7 Segment
Indication
CH1 CH2 dB
Indication
Indication Example Indication Error Rate
VIDEO Lch Total Mode 1 VIDEO Video
OFF OFF LIT
VIDEO Rch Total
CH1 AUDIO Lch Total Mode 2 AUDIO Video r
LIT LIT LIT
CH2 AUDIO Rch Total
Table 8-1-2
8-3. Error Rate Display on Audio Level Meter
Figure 8-1-3