Panasonic AJ-YA120AG, Service Manual

Page: 363 / 647

INF-27
D-SUB 25pin
Cable
PC
P1
CPLD Writer
VFK1590
AJ-HD1200A
P201
Standard : VFK1590P1, VFK1590P2,
Accessory VFK1590P3, VFK1590P4,
(5 Cables) VFK1590P5
P401
P301
CN401
CN301
CN201
CN1
P501
9-2. CPLD Version Upgrade by CPLD Writer (VFK1590)
9-2-1. Connection
1. Connect the D-sub cable between the CPLD writer and personal computer as shown in figure 9-2A-1.
The reference number of D-sub connector can be referred by table 9-2A-2.
2. Connect the CPLD writer cable to the connector on the CPLD writer (VFK1590) as shown in figure
9-2A-1. The part number of cable and reference number of connector can be referred by table 9-2A-2.
Figure 9-2A-1
Connection Between PC / CPLD Writer Connection Between CPLD Writer / Board IC Manufacture
Connection Cable Connector Ref. Connection Cable Connector on
CPLD Writer
VANTICE CN1 VFK1590P1 P1
ALTERA CN201 VFK1590P2 P201
LATTICE CN301 VFK1590P3A P301
XILINX CN401 VFK1590P4 P401
PHILIPS
D-SUB 25pin
Straight Cable
CN1 VFK1590P5 P501
* VFK1590P3A is not standard accessory of VFK1590.
: The CPLD which has been used in this VTR.
Table 9-2A-2
3. Connect the PLD writer cable from the PLD writer to the connector on the Board to be upgraded as
shown in the table 9-2A-3.
4. Turn on the VTR power and Personal Computer.
Board [Slot No.] Name of IC IC Manufacture Writing Tool Version Up Software
PROC [F2] APROC PLD ALTERA Max+plus II
EC_PB [F3] REC_PB(B) PLD LATTICE ispVM System
ERVO [Under Mech] SERVO PLD XILINX (1) Webpack
GEN_SDI [F5]
(Option: AJ-YA120AG)
SDI PLD ALTERA Max+plus II
DC [F5]
(Option: AJ-YA120AG)
UDC PLD ALTERA Max+plus II
IF [F3]
(Option: AJ-YAD120AG)
1394 PLD XILINX (2)
VFK1590
(CPLD Writer)
VFK1879
Table 9-2A-3