Panasonic AJ-YA120AG, Service Manual

Page: 407 / 647

MECH-17
1-28. LISTA Connection and Start Up
TAPE
VFM3781KML (LISTA), VFK3581KM/L (LISTA), VFM3000EDS (DV LISTA)
M. EQ
Personal Computer with A/D Board installed
(Requires Window 95® or 98® and computer must have LSA slot.)
TOOL
VFK1481N (LISTA Software), VFK1186 (LISTA Cable), VFK1300 (A/D Converter Board)
TP
TP405: ATF ERR RPL/TRL
(RF/EQ Board: Slot 1)
TP402: ATF ERR PBR13
(RF/EQ Board: Slot 1)
TP5: R/P L HSW
(RF/EQ Board: Slot 1)
TP7: TR L HSW (HDSP/50)
(RF/EQ Board: Slot 1)
TP2: PB R13 HSW (DV)
(RF/EQ Board: Slot 1)
1. Create a directory and copy all files on the floppy disk (VFK1481N: LISTA Software) to the new directory. (
i.e.:
C: LISTA)
2. Connect the LISTA cable to A/D Board in the PC.
3. Connect the clips of the LISTA cable to test points on the P.C.Board. (Refer to Items “Sensitivity Adjustment”
and “Linearity Adjustment”.)
4. Execute the LISTA software on DOS mode by typing ‘LISTA’ and pressing ENTER key.
5. When
the <<< FORMAT SELECT >>> display appears, select <4> DVCPRO HD.
6. When the <<< VTR SELECT >>> display appears, select the item “<3>AJ-HD1500” according to the
adjustment item as shown the table below.
Adjustment Item VTR SELECT FORMAT Alignment Tape
HDLP Sensitivity Adjustment
HDLP Linearity Adjustment
VFM3781KML
HDSP Sensitivity Adjustment
100M: 1800rpm
SD Sensitivity Adjustment
VFM3581KM or KL
DV Sensitivity Adjustment
AJ-HD1500
50M: 9000rpm
VFM3000EDS
7. Select the Serial number of the Alignment tape on the screen. If the alignment tape to be used is not
registered, the compensation data needs to be entered. Press the ESC key, and select the item “<4>
Alignment Tape” in the main menu.
Linearity monitor system of track
Using ATF error signal for DVCPRO
- - L I S T A P R O --
[Service Use]
<<< FORMAT SELECT >>>
(1) DVCPRO
(2) DVCPRO X4
(3) DVCPRO 50
(4) DVCPRO HD
(5) DV
(6) Quit
Move: Cursor key Select: [ENTER] key
Linearity monitor system of track
Using ATF error signal for DVCPRO
- - L I S T A P R O --
[Service Use]
(for DVCPRO HD VTR)
<<< VTR SELECT >>>
(1) AJ-HD150
(2) AJ-HDC20
(3) AJ-HD1500
(4)
AJ-HDX400
Move: Cursor key Select: [ENTER] key