Panasonic AJ-YA120AG, Service Manual

Page: 388 / 647

DIS-3
(M)
(M)
POWER
SUPPLY
UNIT
1-6. Removal of Power Supply Unit
1. Disconnect the two connectors and unscrew the
two screws (L).
2. Unscrew the two screws (M) and lift up the
Power Supply Unit to remove it.
1-7. Removal of Mechanism Unit
1. Unscrew the three screws (N) and open the
Power 3 Circuit Board.
2. Disconnect the five connectors (P901, P900,
P902, P4 and P3) On the Servo Board.
3. Disconnect the two connectors (P2, and P4001),
and remove the four screws (O).
4. Slowly lift up the Mechanical Chassis Unit.
Note: Perform assembly by reversing the procedure.
P2
P4001
(O)
CONNECTORS
(L)
POWER
SUPPLY
UNIT
P900
P4
P3
P901
SERVO BOARD
(N)
POWER 3
BOARD
P902