Panasonic AJ-YA120AG, Service Manual

Page: 298 / 647

MECH-28
2-3. Adjustment after Replacement
of Cylinder Unit
1. Perform each adjustment according to the following
flow chart after the replacement of the Cylinder
Unit.
Note : Electrical Adjustment contains the ENV
Level Adjustment and PG Shifter
Adjustment.
Start of Mechanism Adjustment
1-10. Tension Confirmation
1-15. A/C Head Tilt Confirmation
1-12. ENV Waveform Adjustment
1-16. A/C Head Height Confirmation
1-17. A/C Head Azimuth and X-Value Adjustment
1-18. REV Tape Path Limit Confirmation/Adjustment
(T6 Height Adjustment)
1-14. A/C Head Tilt Adjustment
1-16. A/C Head Height Confirmation
and Adjustment
1-24. REV Mode Confirmation
1-26. Lock Tight on A/C Head
Note : Envelope Adjustment
Note : PG Shifter Adjustment
1-27. LISTA Adjustment Procedure
1-25. FF/REW Limit Confirmation
1-35. Self Recording/Playback
ENV Waveform Confirmation
REC Current & Frequency Response Adjustment
EQ Adjustment
Start of Electrical Adjustment
END
1-19. Long PLAY Tape Damage confirmation
1-20. CTL Self Recording/Playback
Level Confirmation
1-21. PLAY Tape Path Confirmation
1-22. REV/REW/FF Envelope Confirmation
1-23. Envelope Start Confirmation
1-30. LISTA Sensitivity Adjustment and Detection (HDLP)
1-31. LISTA Linearity Adjustment and Waving
Measurement
1-32. LISTA Sensitivity Adjustment and Detection (HDSP)
1-33. LISTA Sensitivity Adjustment and Detection (SP)
1-34. LISTA Sensitivity Adjustment and Detection (DV)
1-35. Self-REC/PLAY Envelope Waveform
Confirmation