32
004732026 - 13/05/2022
4 HANDLING AND TRANSPORT
The device is delivered with all the parts provided, com
-
pletely disassembled, in a packaging suitable for long
transport.
It is advisable to unpack the appliance only when it has
arrived at the installation site.
Proceed to move and unpack the appliance with
suitable means.
Make sure that children do not play with the packaging
components (e.g. films and polystyrene):
Danger of suffocation!
During lifting, avoid jerking or abrupt movements.
The full responsibility of the lifting of loads lies with the
person handling the lifting equipment.
Removal of the transport pallet
The device is delivered with all the components disas
-
sembled and stacked on a pallet, protected and held in
place by a shrink wrap.
Proceed to unpack and unload components with
caution.
Danger of falling components!
Always follow the regulations in force in the country in
which the appliance is being used for disposal of materi
-
als and possibly for the disposal report.
Transportation
Make sure that the lifting carriage has a payload
higher than the weight of the appliance to be lifted.
Ensure wood or timber floors are properly protect
-
ed in order to prevent the weight of the appliance
from damaging them during movement.
Checking the floor where the appliance will be
placed
Check the load capacity of the floor slab.
If a floor is not suitable for supporting the weight of the
appliance, install appropriate steel plates or concrete
base equipped with 10x10x6 electro-welded mesh to
distribute the weight.
For the dimensions of the plates and cement base,
contact a qualified technician.
5 PREPARING THE PLACE OF
INSTALLATION
5.1 General considerations
The following paragraphs contain some guidelines to be
followed to obtain the maximum efficiency of the product
purchased and to ensure safe operation. The following
indications are however subject to compliance with
any possible national, regional and municipal laws and
regulations in force in the country where the appliance
is installed.
In Italy, installation must be performed by qualified per
-
sonnel in compliance with the UNI 10683 standard.
5.2 Safety Precautions
The operations for assembly and disassembly of the
appliance are reserved for specialist technicians only.
It is recommended to be sure of their qualifications and
their actual capacity.
*For Italy, these technicians must be in possession
of the letter "C" issued by the Chamber of Com-
merce on the basis of Italian Ministerial Decree
37/08.
5.3 Place of installation
For the minimum distances that must be observed when
positioning the appliance with respect to flammable
materials and objects, refer to the table "
Installation
distances from flammable material
".
Floors made of flammable material such as wood, par
-
quet, linoleum, laminate or floors covered with carpets
must be protected by a fireproof base under the appli
-
ance that also protects the front during cleaning from any
falling burning residues.
H
A
B
Product images are for illustrative purposes only
LEGEND [cm]
A
Front protrusion
H + 30 cm (total minimum 60)
B
Lateral protrusion from the farthest point of the
firebox
H + +20 cm (total minimum 40)
H
Height of the fire bed
