004732026 - 13/05/2022 29
ENGLISH
2 SAFETY WARNING
2.1 Warnings for the installer
Observe the prescriptions contained in this
manual.
The assembly instructions for the device
are reserved for specialised technicians
only.
The installation, use and maintenance of
the product must be in accordance with the
manufacturer’s instructions and in compli-
ance with the regulations. Failure to comply
with the instructions and any incorrect oper
-
ations may give rise to hazardous situations,
damage to property, animals, health problems
or malfunctioning.
The cladding must be carried out in such
a way that the user cannot gain access
to hazardous parts.
The installation and maintenance of the
product must be carried out exclusively by
qualified personnel with suitable knowledge
of the product itself. Use only original spare
parts recommended by the manufacturer.
Responsibility for the works carried out in the
location of the appliance is, and remains, with
the user; the latter is also responsible for car-
rying out the checks relating to the proposed
installation solutions.
The installer must comply with all local, na
-
tional and European safety regulations.
The appliance must be installed on floors with
adequate load bearing capacity.
Verify that the chimney flue and air inlet
predispositions conform to the type of
installation.
Before starting the assembly or disassembly
phases of the appliance, the installer must
observe the safety precautions required by
law and the following instructions in particular:
• do not operate in adverse conditions;
• they must operate in perfect psychophysical
conditions and must check that the personal
protective equipment is intact and function-
ing perfectly;
•
they must wear gloves and safety shoes;
•
they must use tools with electrical insulation;
•
they must make sure that the area used
during assembly/dismantling is free from
obstacles.
The product must only be installed in rooms
that are not subject to fire hazards and must
be equipped with all the necessary facilities
including air supplies and flue gas exhausts.
Evaluate the static conditions of the surface
bearing the weight of the product and provide
suitable insulation if it is composed of flam
-
mable materials (e.g. wood, carpet, plastic).
2.2 Warnings for technical maintenance
personnel
The formation of cracks and surface cracks
are part of the normal settlement of the bar-
becue, and do not compromise the safety and
functionality of the product, as required by the
UNI-EN1860-1 standard.
Maintenance operations must be carried out
only by authorised and qualified personnel.
Observe the prescriptions contained in this
manual.
Always use personal protective equipment
and other means of protection.
Before starting any maintenance work ensure
that the appliance, if it has been used, has
cooled down.
Even if only one of the safety devices is not
working, the appliance is to be considered not
working.
2.3 Warnings for users
The appliance may only be put into operation
when installation is complete and cladding is
in place.
