PairGain PG-Flex, Manual

Page: 151 / 168

Setup Menu Screens
A-29
POTS Loop/Ground Start
From the POTS Loop/Ground Start menu, you can change a channel unit parameter to loop start or
ground start. Refer to Table A-5 for POTS ground/loop start configuration options.
Table A-5. POTS Ground/Loop Start Configuration Options
Parameter Default Value Function
Channel
Configuration Loop Each POTS channel may be individually configurable as Loop Start or
Ground Start. This configuration is stored in both the COLU and the
channel card. If any one card (COLU, RTLU, COCU or RTCU) is
removed and replaced or reinserted, the Loop/Ground Start
Configuration is automatically preserved. Can be set to the following
parameters:
• LOOP: The selected channel is set for Loop Start.
• GND: The selected channel is set for Ground Start.
01-SEP-97 PAIRGAIN TECHNOLOGIES INC., PG-FLEX TERMINAL 03:41:20
SYSTEM ID: PairGain PG-Flex System SYSTEM: 1
POTS GROUND/LOOP START CONFIGURATION
----------------------------------------------------------------------------
CU1 CU2 CU3
Channel COT (POTS8) (POTS8) (ISDN4)
RT (POTS8) (POTS8) (ISDN4) (---)
----------------------------------------------------------------------------
1 LOOP GND N/A
2 LOOP GND N/A
3 LOOP GND N/A
4 LOOP GND N/A
5 LOOP GND -
6 LOOP GND -
7 LOOP GND -
8 LOOP GND -
CTRL-X) Main Menu e(X)it
[COT] ENTER COMMAND>x