otometrics Madsen Xeta Reference Manual Download Page 47

Page: 47 / 108

Creating a new patient

•

Press

New Patient

to create a new patient record in MADSEN Xeta. This applies to unscheduled patients.

These records hold no patient name, ID or test data. Only the list number.

Patient records

Scheduled patients

•

When you test the patient, the test data will be stored
in a numbered patient record.

5.2.3

The patient responder

•

Place the patient in a sound booth, if one is available, and facing away from MADSEN Xeta.

•

Instruct the patient in how to use the patient responder.

•

Instruct the patient in pressing the button even if only weak signals are heard.

Note

•

During automatic testing, if the patient presses the switch repeatedly during a stimulus

presentation, the response is ignored.

Note

•

During automatic testing, if the patient does not release the switch, a beep is issued in the headphones. If this

situation is repeated, the test is paused. Reinstruct the patient.

•

Before testing, check that the

Response

indicator lights up when the patient presses the responder.

5.2.4

Preparing for air conduction testing

Fitting on patient

•

Fit the headphones on the patient, with the red phone on the right ear.

•

Choose the ear with the better hearing to be tested first.

Instructing the patient

•

The patient will be hearing brief tones.

Otometrics - MADSEN Xeta

5 Preparing for testing

Summary of Contents for Madsen Xeta













































































































Search results

Summary of Contents for Madsen Xeta

Reviews:

Related manuals for Madsen Xeta

Brands by name

Popular brands

otometrics Madsen Xeta, Reference Manual

Search results

Summary of Contents for Madsen Xeta

Reviews:

Related manuals for Madsen Xeta

Brands by name

Popular brands