otometrics Madsen Xeta, Reference Manual

Page: 93 / 108

16. Avoid using extension cables. The increased length of the cable may increase the resistance of the protective earth
conductor beyond an acceptable level.
17. Operating at the wrong voltage may blow the fuses.For continued protection against fire hazard, replace
fuses with the same type and rating only.
18. To comply with Medical Electrical Systems in IEC 60601-1 3.1 edition:2012, computer and printer must be placed out
of reach of the client, i.e. not closer than approx. 1.5 meters/5 ft.
14.3 The OTOsuite Audiometry Module
Complies with Medical Devices Directive 93/42/EEC and RoHS Directive (2011/65/EC).
Used in error message dialogs if software program fails. See the detailed information in the dialog box.
14.4 Manufacturer
Natus Medical Denmark ApS
Hoerskaetten 9, 2630 Taastrup
Denmark
+45 45 75 55 55
www.natus.com
14.4.1 Responsibility of the manufacturer
The manufacturer is to be considered responsible for effects on safety, reliability, and performance of the equipment only
if:
• All assembly operations, extensions, re-adjustments, modifications or repairs are carried out by the equipment man-
ufacturer or personnel authorized by the manufacturer.
• The electrical installation to which the equipment is connected complies with EN/IEC requirements.
• The equipment is used in accordance with the instructions for use.
The manufacturer reserves the right to disclaim all responsibility for the operating safety, reliability and performance of
equipment serviced or repaired by other parties.
Otometrics - MADSEN Xeta 93
14 Standards and safety