otometrics Madsen Xeta, Reference Manual

Page: 14 / 108

If the patient does not respond to the presented signal, the level is automatically increased until the patient
responds to the signal.
The signal is as default presented for each tone in the following order:
1000 Hz, 2000 Hz, 4000 Hz, and 8000 Hz, followed by 500 Hz and 250 Hz.
If AS Do AT when AS fails ► 57 is set to to
Yes
, the Auto Threshold test is activated immediately when a fre-
quency fails. The test returns to Auto Screening when a threshold has been determined for the specific fre-
quency. See also
Automatic Air Conduction testing ► 12 .
Note
•
You can use Talk Over at any time during the test. This will pause the test. The test is resumed when you
release the Talk Over button.
3. Xeta beeps twice and the display shows that the test is completed. The results are stored automatically.
4. To retest any frequencies, see Automatic Air Conduction testing ► 12 and Air Conduction threshold test (manual) ►
67 .
5. If required, select the next patient record (press
Previous
/
Next
) or press
New Patient
.
2.4 User-defined tests
With MADSEN Xeta you can quickly and easily customize your tests for maximum efficiency.
Make the changes you want in the setup of MADSEN Xeta and save these changes as a specific User Test. See Setup ► 20 .
14 Otometrics - MADSEN Xeta
2 Getting started