5. FIRMWARE COMMANDS AND RESPONSES
43
LIST_TRIG_SAMPLE
Lists the various trigger sources in InSight mode.
Response:
TRIG_SAMP Random LLD PeakDet Gate
LIST_ZERO_ADJUST
Displays the range of zero-stabilizer adjustment that can be returned with the
SHOW_ZERO_ADJUST command. A value of
!
100 corresponds to the internal value of
!
100 and +100 corresponds to +100.
Response:
ZERO_ADJU
!
100 100
!
100 100
RESET
Resets the digiBASE-E to the state just after power is applied. This command responds with
a % response that indicates power-up just occurred.
RESET_REMOTE
Resets any UART error conditions when sent to the digiBASE-E via the Ethernet.
SAMPLE
Causes a waveform to be captured in InSight mode.
Response:
%000128080
No waveform was available
%000000069
New waveform was successfully captured
SET_DATA [start, chans],value
If the optional start and chans parameters are included in this command, the range of
channels specified by start and chans is loaded with value. If start and chans are not
specified, sets all channels of spectral data in the window of interest (see SET_WINDOW
command) to the specified value. ROI flags are not affected.
SET_DATA_APPLICATION “string1",”string2"
This is used to store information in the digiBASE-E internal memory that can be used by
other programs, such as sample descriptions and energy calibrations. C
ONNECTIONS
makes
use of this feature. String1 = the data identifier, 32 bytes maximum; string2 = the data, 128
bytes maximum.
SET_DISPLAY
SET_FRONT_BYP
No function in the digiBASE-E; included for backward compatibility.
Summary of Contents for digiBASE-E
Page 6: ...vi...
