1. INTRODUCTION
1
For the purposes of this manual, when we refer to MAESTRO, we mean the ORTEC MCA emulator/analysis
application you are using (e.g., MAESTRO, ScintiVision-32).
3
into their own software systems. The Toolkit offers Microsoft
®
ActiveX
®
controls to simplify
programming with National Instruments LabVIEW
®
, and Microsoft Visual C++ and Visual
Basic.
1.2. Host PC and Software Requirements
The digiBASE-E is completely computer-controlled and can be operated with any suitable
version of ORTEC C
ONNECTIONS
software, including the supplied MAESTRO (v6.08 or later);
communicating via C
ONNECTIONS
(v6.12 or later). The digiBASE-E connects via an RJ45
(8P8C) port and can be used on any PC running 32- or 64-bit Windows 7, or XP Professional
SP3.
NOTE
You must have Windows administrator-level access to install ORTEC software.
1.3. About This Manual
This manual describes the digiBASE-E, tells how to connect it in a complete spectroscopy
system, gives instructions on configuring the hardware settings (such as high voltage, presets,
and gain), supplies the firmware commands and responses, and provides details on List Mode
operation. Complete details on using the control software are in the MAESTRO Software User’s
Manual as well as the manuals for ScintiVision-32 and our other ORTEC software applications.
1
Summary of Contents for digiBASE-E
Page 6: ...vi...
