digiBASE-E ™ High-Performance Power-over-Ethernet Multichannel Analyzer / PMT Base for Scintillation Detectors
50
SHOW_CONFIGURATION_MASK
Returns two masks, the first of which can be “anded” with data from the MCB to clear the
ROI bit from the data. When the second mask value is “anded” with data from the MCB, the
data bits are removed and only the ROI bit remains.
Response:
CONF_MASK 02147483647 02147483648
SHOW_CRM
Returns the current reading of the count-rate meter.
Response:
CRM 00000021530
Current input count rate is 21530 counts/s.
SHOW_DATA_APPLICATION “string”
If string matches “string1" in a previous SET_DATA_APPLICATION command, then
string2 from that command is returned. The response is a $F record.
Execution Errors:
%131138085<CR>
The specified string could not be matched.
SHOW_DET_TEMP
As of this release, functions for special-order Scionix detector with Rodan NTC thermistor
05CB102K. Returns the detector temperature in degrees Celsius.
Response:
DET_TEMP 0000026.962955
SHOW_DEVICE
Shows the currently selected device. Always 1 for digiBASE-E.
SHOW_FEATURES
Responds with four 32-bit masks indicating which features are present in the MCB. See
Appendix 4.6 for a complete description of each bit in the mask.
Example Response:
FEATURES 02149587261 01619623948 02175271168 00000000000
SHOW_GAIN_ADJUST
Returns percentage adjustment that has been applied by the stabilizer.
SHOW_GAIN_CHANNEL
Reports the current center channel for the stabilizer gain peak or zero if the gain channel has
not been set. See also SET_GAIN_CHANNEL.
Summary of Contents for digiBASE-E
Page 6: ...vi...
