Oracle EXADATA X6-2, Service Manual

Page: 136 / 284

Install a Processor
136 Oracle Server X6-2 Service Manual • June 2016
c.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 191 .
d. Reconnect the data cables and reconnect the power cords to the server
power supplies.
See “Reconnect Data Cables and Power Cords” on page 193 .
e. Power on the server.
See “Power On the Server” on page 194 .
Verify that the Power/OK status indicator is steady on.
19.
Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at
http://www.oracle.com/goto/ilom/docs
for more information about the following steps.
a.
To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the system:
->
show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
0 (/SYS/MB/P0)Properties:
Commands:
cd
show
Alternatively, to list all known faults in the server, log into the Oracle Solaris OS and
issue the
fmadm faulty
command, or log into the Oracle ILOM service processor from
the Oracle ILOM Fault Management Shell and issue the
fmadm faulty
command. For
more information about how to use the Oracle ILOM Fault Management Shell and
supported commands, see the Oracle ILOM User's Guide for System Monitoring and
Diagnostics Firmware Release 3.2.x in the Oracle Integrated Lights Out Manager (ILOM)
3.2 Documentation Library at:
http://www.oracle.com/goto/ilom/docs
b. To clear the fault, type the following command:
->
set /SYS/MB/P0 clear_fault_action=true
For example:
->
set /SYS/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)?
y