manualshive.com logo in svg

Oracle EXADATA X6-2, Service Manual, Page: 252 / 284

Share
Download
Oracle EXADATA X6-2 Service Manual Download Page 252

Monitoring System Components

252

Oracle Server X6-2 Service Manual • June 2016

Guide for Configuration and Maintenance Firmware Release 3.2.x

 in the Oracle Integrated

Lights Out Manager (ILOM) 3.2 Documentation Library at 

http://www.oracle.com/goto/

ilom/docs

.

Related Information

■

Oracle Integrated Lights Out Manager (ILOM) 3.2 Documentation Library at: 

http://www.

oracle.com/goto/ilom/docs

Monitoring System Components

The tables in this section identify the system components and describe the naming conventions

applied to the components of the Oracle Server X6-2.

Each section corresponds to an IPMI entity ID and lists sensors, indicators, and field-

replaceable units (FRUs) related to that entity. The tables contain the following fields:

■

Component Name

 – Shows the user-visible component name used in management

interfaces to refer to a specific sensor, indicator, or FRU. The IPMI name is a shortened

form of the component name, and is indicated by the 

boldface

 portion of the component

name.

■

IPMI Type

 – Indicates the type of sensor, indicator, or FRU represented.

■

Description

 – Describes the particular component name reference.

■

Values

 – Defines the states of the sensor, indicator, or FRU entity, and any specific units or

values that are expected, if applicable.

Note - 

Some component names are hidden in the Oracle ILOM user interfaces. These names

are marked as hidden in the tables. Further, as of Oracle ILOM 3.2, the Oracle ILOM 3.0 legacy
targets 

/SYS

 and 

/STORAGE

 have been replaced by 

/System

. Even though these legacy targets

might be hidden, you can still use them to issue commands. For information on legacy targets,
see the ILOM 3.2 Documentation Library at 

http://www.oracle.com/goto/ilom/docs

.

This section includes information for the following server components:

■

“System Chassis Components” on page 253

■

“Cooling Unit Components” on page 255

■

“Disk Backplane Components” on page 255

■

“Memory Device Components” on page 256

■

“Power Unit Components” on page 257

■

“Processor Components” on page 258

Summary of Contents for EXADATA X6-2





























































































































































































































































































Reviews:

No comments