manualshive.com logo in svg

Oracle EXADATA X6-2, Service Manual, Page: 208 / 284

Share
Download
Oracle EXADATA X6-2 Service Manual Download Page 208

Using UEFI

208

Oracle Server X6-2 Service Manual • June 2016

UEFI Boot Mode Advantages

When the option is available to choose between a Legacy BIOS Boot Mode or UEFI BIOS

Boot Mode operating system installation, the advantages to choosing a UEFI BIOS Boot Mode

installation include the following:

■

Avoids Legacy Option ROM address constraints. For more information, see 

“Using BIOS

for Legacy Option ROM Resource Allocation” on page 209

.

■

Supports operating system boot partitions greater than 2 terabytes (2 TB) in size. For more

information about the limitations for supported operating systems, refer to the 

Oracle Server

X6-2 Product Notes

 at 

http://www.oracle.com/goto/x6-2/docs

.

■

Integrates PCIe device configuration utilities within the BIOS Setup Utility menus. For

more information, see 

“BIOS Setup Utility Menu Options” on page 227

.

■

Displays bootable operating system images in the boot list as labeled entities, for example,

you will see a Windows boot manager label as opposed to raw device labels.

Related Information

■

“Selecting Legacy BIOS or UEFI Boot Mode” on page 206

■

“Select the Boot Device” on page 213

■

“Exit BIOS Setup Utility” on page 224

Configuration Utilities for Add-In Cards

The method for interacting with configuration utilities for add-in cards and (system resident) I/

O adapters differs depending on whether Legacy BIOS Boot Mode or UEFI BIOS Boot Mode

is used.

In Legacy BIOS Boot Mode, I/O adapter utilities are invoked during BIOS POST progression

using hot keys identified by the adapter Option ROM during POST. When the hot key is

pressed, the adapter specific configuration utility interface is presented. Often the interface will

have a vendor-specific design.

In UEFI BIOS Boot Mode, the configuration screens for the add-in cards will appear as menu

items in the BIOS Advanced Menu as part of the standard BIOS Setup Utility screens. For

example, if the Oracle Storage 12 Gb/s SAS PCIe RAID host bus adapter (HBA) is installed in

the server, the configuration utility for the HBA appears as a menu selection under the iSCSI

menu option on the BIOS Advanced Menu.

Related Information

■

“Selecting Legacy BIOS or UEFI Boot Mode” on page 206

Summary of Contents for EXADATA X6-2





























































































































































































































































































Reviews:

No comments