Oracle EXADATA X6-2 Service Manual Download Page 228

Page: 228 / 284

BIOS Main Menu Selections

228

Oracle Server X6-2 Service Manual • June 2016

The following tables describe the options provided by the BIOS Main Menu and submenus.

TABLE 27

BIOS Main Menu Options

Setup Options

Options

Defaults

Description

Project Version

(R/O)

BIOS version is displayed. This string

is a unique identifier used to reference

a specific BIOS release. Format is

XXYYZZPP, which indicates:

■ XX - Unique project/platform code.
■ YY - BIOS major release.
■ ZZ - BIOS minor release.
■ PP - Build number.

Example: 18.01.04.01

System Date

Current date is displayed. You can

change the date setting.

Example: [Thu 06/20/2014]

System Time

Current time is displayed. You can

change the time setting.

Example: [13:38:27]

QPI Link Speed

(R/O)

SLOW/

6.4 GT/s/

Intel Quick Path Interconnect (QPI)

operational speed is displayed. The

SLOW option displays as unknown in

single-processor systems.

Summary of Contents for EXADATA X6-2





























































































































































































































































































Search results

Summary of Contents for EXADATA X6-2

Reviews:

Oracle EXADATA X6-2, Service Manual, Page: 228 / 284

Search results

Summary of Contents for EXADATA X6-2

Reviews: